Awning-type Exterior Roller Shades

Awning-type Exterior Roller Shades, sometimes also called folding outdoor roller shades or louvered outdoor roller shades (though their core drive differs from that of louvers), are outdoor shading and protective devices that use a swing-arm (linkage) mechanism to extend and retract the shade fabric. They are usually combined with a side guiding system (which may be rails or guide grooves, or sometimes no rails at all, relying solely on the swing arms for constraint). The core principle is to use one or more sets of crossed or parallel swing arms (similar in structure to a canopy frame) to drive the shade fabric during raising and lowering. Through the rotation and extension/folding of the swing arms, the fabric is unfolded from the roller into a flat or slightly arched shading surface, or retracted from the extended state back onto the roller.

Send Inquiry

Product Description

Product Parameters

The parameters of Awning-type Exterior Roller Shades vary greatly depending on the design and drive method. The following are typical reference values.

Size	Width: 1-8m (even more wider); Height: 1.5-5m (can be higher with special design)
Fabric material	Commonly used polyester fiber (PET) coated fabrics (PVC, acrylic, PVDF, etc.), fiberglass composite fabrics, aluminum alloy foil fabrics; Weight: 400~1500 g/㎡ (needs to be stiff enough to match the arm deployment shape, higher weight is preferable)
Running	Manual: hand crank, rodAutomatic: tubular Motor, motor with chainSmart control: remote, timer, wind sensor
Waterproof	Static wind resistance: Level 5~10 (wind speed 13~28 m/s, depending on the strength of the swing arm, fabric weight, and whether there is an auxiliary guide rail);Dynamic wind resistance: Recommended ≤ Level 7 (the swing arm structure may sway in strong winds, some high-end models come with a locking device)
Sun Shading	Shading Coefficient (SC): 0.2~0.8 (depending on fabric color and coating); Heat Transfer Coefficient (K-value): ≤3.5 W/(㎡·K) (slightly inferior to the articulated arm track type, as the fabric surface may have slight bulging which can cause a slightly weaker seal)
Running Noise	≤60dB (electric version, the swinging arm may make slight mechanical noise); manual version is noiseless
Protection level	Motor IP54 (dust and water resistant, suitable for outdoor humid environments); rails/hardware are galvanized or treated with 304 stainless steel for rust prevention
Usage life	Fabric: 5–10 years (UV aging resistant); Hardware: over 10 years; Motor: 50,000–80,000 cycles (about 5–8 years)
Opening	Flat type, slight arch (arched), partially adjustable curvature

Product Features and Applications

Features
1.Strong wind resistance, may pass 5-6 level wind test
2.Long service life, under bad weather, may use more than 20 years.
3.While providing shade, it is also more ventilated.

Application
1.Residential building
2.Commercial space
3.Public building
4.Industrial and special scenarios

Arm-swing outdoor roller shutters, with their large-span coverage capability and unique design, have become an ideal choice for large buildings and situations with specific shading requirements.